that are ½ inch thick, CNC Laser cut center housing side plates that are
3/8 inch thick.
All crucial fitting parts are then finished on a Bridgeport Vertical
Mill.
The housings are machined to accept any early 1964 to 1979 8 inch small
bearing, small Ford differentials, with 28 spline axles.
from Currie Enterprises, they are 28 spline Billet Steel Axles and
Currie Ford reconditioned 8" Ford differential.
Bill Currie Axles are made to my specifications, and are also used in my
Custom Width Rear Axle Housing Assembly.
We can also supply the Custom Width rear axle housing to your specs.
The wide-track Pioneer body style rear-axle assembly is 45 1/2 inches
wide, drum to drum.
The Liberty and Patriot body axle brake surface to brake surface width
is 38 ½ inches wide, drum to drum for use of
up to 12 ½ Section Width Tires.
These narrower housings are great for that wall-to-wall tire look.
The U.S. TRIKES (TM) Rear Assembly. comes
Completely Assembled, Less Brakes, just add the Brakes of your choice,
which are also available from Bill Currie Ford.
All that is left to do to the rear-axle assembly is clean, prime, and
paint the color of your choice.
It is even Pre-Greased to be sure it is not overlooked.
Drive Sprocket-Price included with Rear Axle Assembly
CHAIN DRIVE INCLUDED IN KIT PRICE.
BELT DRIVE KIT, ADD $500
CHAIN DRIVE TO BELT DRIVE
CONVERSION kits for ALL HARLEY DAVIDSONS
$500.00 Extra
We use 8" Ford Rebuilt differentials and custom-made NEW Billet Steel
Axles.
We do not use cut and re-splined stock axles.
Brakes
To keep the axle-housing and kit affordable, and give the you the option
of choosing your own
brake system, backing plates and brake parts are not included.
Brake parts from most 8 inch small bearing Ford brake systems will work
(1964 to 1979) the smaller the better.
Remember. Your trike does not weigh as much as a car. A good size would
be: mustang, Comet, Granada etc.
NOTE: Must be 8 inch 5 lug axles, known as "5 on 4 1/2 bolt pattern"
These smaller brake systems will work with 5/8 inch or 3/4-inch rear
Harley master cylinders.
NOTE: 3/4-inch works best.
The 113 cu.in. S&S powered trike on the homepage of this website has a
"Speedway Automotive"
Part# 835-100262, Black Gold Brake Kit Street Rod Wilwood Disc brake
Kit. $550.00 option
It comes with two 4 piston black anodized calipers. The 3/4 inch FL/FX
master cylinder that
I used is just a little on the small side, but makes them work Great,
they feel like Power Brakes,
a 5/8 inch will NOT work with these calipers. This kit is a little bit
of overkill for the weight
of the trike, but believe this; It DEFINITELY has great brakes.
All Brakes should use a Residual Valve. These Valves hold a little
pressure on the Brake Pads or Shoes,
allowing the Brake Pedal Not to have to travel down to far before
engaging to the Drum or Rotor
ELECTRIC TRIKE REVERSE
Optional U.S. TRIKES (TM)
ORIGINAL & UNIQUE Electric Reverse[patent pending]
Fully installed, just connect 2 wires and you are ready to do backups
without pushing with your feet
The reverse kit MUST be ordered with the U.S. TRIKES (TM)
electric reverse housing because the housing is designed to
accept our original and unique electric reverse mechanism.
A new center housing to accept the electric reverse is available at an
extra cost if not ordered initially.
The reverse kit comes pre-installed when ordered initially.
ELECTRIC REVERSE MOTOR COMES
WITH LIFETIME WARRANTY
